FMEA - Failure Mode and Effect Analysis

http://www.trainingpages.co.uk/index.cgi

JPD Training Ltd
FMEA: Failure Mode & Effects Analysis (In-House, 1 day, Introductory)
A technique that identifies process problems before they occur. The course includes: (1) FMEA and its relationship with other disciplines and techniques. (2) The foundations necessary to make FMEA work

Smallpeice Enterprises Ltd
Design Failure Modes and Effects Analysis (Public, 1 day, All)
FMEA enables designers to identify product failures before they happen. It is a systematic procedure which facilitates engineering design & new product introduction by establishing potential product failures, & relating

AMG INTERNATIONAL
Failure Mode Effect Analysis (FMEA) (In-House, 2 days, All)
This course covers the use and development of FMEA (both Design & Process)

EEF West Midlands Technology Centre
Failure Mode and Effects Analysis (FMEA) (Public, 1 day, All)
This 1-day course is aimed at persons from quality functions or engineering production. This programme is designed to provide the delegate with the ability to apply FMEA techniques to products

Smallpeice Enterprises Ltd
Process FMEA (Public, 1 day, All)
Process FMEA enables engineers and managers to identify potential process failures and to take appropriate corrective actions prior to full production & product launch. The course introduces a systematic approach

Woodland Grange
Failure Mode & Effects Analysis (Public, 1 day, Intermediate)
FMEA is a method of reviewing designs and processes to prevent design deficiencies and non-conformance. FMEA assesses every conceivable failure to discover the effect on the customer and the steps

4aBetterBusiness,Inc.
FMEA Training & Implemenation Guide - Free Demo Available (CBT, 0.5 days, Introductory)
FREE DEMO available through web site. Starts with people's day-to-day experience to help them understand concept and use of FMEA. Builds on this foundation to develop confidence to participate in

http://www.smqe.de/smqe/smqe.htm (German)

Dr. Stefan Mennicke : Qualitäts- und Entwicklungsmanagement

Beratungsleistungen zur Einführung, Pflege und Optimierung von Qualitätsmanagementsystemen und zur Unterstützung von Entwicklungsprojekten biete ich die folgenden Leistungen an: Qualitätsmanagementmethoden: In-House-Seminare, Training on the Job, Moderation

QFD (Quality Function Deployment)
FMEA (Failure Mode & Effects Analysis)
FTA (Fehlerbaumanalyse)
Zuverlässigkeitsanalyse und –planung
Versuchsplanung, Auswertung von Daten (Versuch und Feld)

Dr. Reinold Hagen StiftungFMEA - Vermeidung von Ausfällen durch systematische FehleranalyseZiel der Veranstaltung Ziel des Seminars ist es, eine fundierte Einführung in die Methodik zu geben und die Unterschiede zwischen den einzelnen FMEA-Methoden darzustellen

Inhalt: Verschiedene FMEA-Arten, Nutzen und Aufwand , Vorbereitung zu einer FMEA , FMEA-K System (Konstruktion und Vertrieb) , FMEA-V Prozeßplanung (Vorbereitung und Logistik) , FMEA-P Prozeßschritte , Bewertungstabellen 

Referent(en) Herr Dr.-Ing. Paul R. Melcher

At Intelli-Tek, we specialize in performing Failure Modes and Effects Analyses (FMEA), Failure Modes Effects and Criticality Analyses (FMECA), Fault Tree Analyses (FTA), Reliability Prediction, and Maintainability Analyses.We also perform System Safety Analyses on a variety of systems. For more detail on these analyses go to our services page.

Productive Solutions International Inc. provides a full selection of facilitation, training, and management services. PSI can give you the tools you need to position your company for the future. Services can be provided at our office in Allen Park, Michigan or at your company location. PSI is the sole supplier of Byteworx FMEA 2000, a dynamic new FMEA software. Our FMEA services are in great demand by many clients. Our FMEA efforts are overseen by Heather Clark. She is the North American Subject Matter Expert on FMEA for Ford Motor Company. Further, she is a frequent FMEA lecturer for both universities and trade organizations. PSI's customer base includes many Fortune 100 and Fortune 500 companies in areas as diverse as automotive, home appliance, electronics, computers, utilities, insurance and medical devices and processes as diverse as assembly, casting, injection molding, die making, painting, welding, stamping and soldering.

Business and Industry Services is a unit of Northern Illinois University specializing in corporate training & consulting.Failure Mode & Effects Analysis (FMEA) course: Manufacturing, process, and industrial engineers will learn the logic behind FMEA, as well as the techniques of both Design and Process through the demonstrations of several applications. Topics include design FMEA, after FMEA, and special considerations. This course meets the government requirement of "Failure Mode and Effects Analysis" in MIL-STD 1629A. For information call Mary Rose Hennessy at 630-573-5070 (x225).

 Doel van de Workshop: Na het volgen van de workshop zijn deelnemers in staat om het FMEA proces in de eigen werkomgeving te organiseren en op een effectieve wijze toe te passen. 

Inhoud: · Achtergrond en het ontstaan van de FMEA-techniek · Samenstellen van het team dat de FMEA uitvoert, de rol van het management · De verschillende soorten FMEA's · Mogelijke faalwijzen en de gevolgen op verschillende abstractie-niveaus · Hulpmiddelen bij het bij het opsporen van mogelijke oorzaken · Frequentie van optreden, metingen en waarnemingen · Risk Priority Number (RPN) en hoe hiermee om te gaan · Het verbetermechanisme binnen een FMEA · Het "managen" van risico's en de FMEA-databank · QFD planningmatrix voor het kiezen van projecten · De link tussen FMEA, Beheersplan en SPC 

Doelgroep: Deze workshop is bestemd voor een ieder, die op een preventieve en proactieve manier met het verbeteren van kwaliteit bezig is, zowel in de ontwerp-fase als in de produktie. Voor het bereiken van de doelstellingen van een bedrijf leert de praktijk dat een combinatie van deelnemers uit verschillende disciplines een hoog rendement oplevert. 

Duur van de workshop: De workshop omvat twee dagdelen van circa 3,5 uur .

Opleiding tot FMEA-facilitator. Na deze workshop kunt u:· een analyse maken van het productontwerp of proces · de onderdelen identificeren · de faalkansen inschatten · de oorzaken onderzoeken · de gevolgen inventariseren en hun ernst bepalen · acties nemen om de faalkansen te verminderen

http://www.amsup.com/fmea/index.htm

http://www.amsup.com/fmea/workshops.htm

The American Supplier Institute FMEA trainings

1. Failure Mode & Effects Analysis (FMEA) (1-Day Workshop)
2. Failure Mode & Effect Analysis (FMEA) (1-Day Workshop)
3. Process Failure Mode & Effects Analysis  (1-Day Workshop)
4. System and Design Failure Mode & Effects Analysis (1-Day Workshop)
5. Failure Mode & Effects Analysis (FMEA) (2-Day Workshop)
6. Process Failure Mode & Effects Analysis  (2-Day Workshop)
7. System and Design Failure & Effects Analysis  (2-Day Workshop)
8. Machine & Equipment FMEA  (2-Day Workshop)
9. FMEA Facilitation Services  (As needed, based on product or machine complexity)

http://cimi.tm.fr/programmes/mio42.html

AMDEC MOYENS DE PRODUCTION Analyse des Modes de Défaillance, de leurs Effets et de leur Criticité
Avec la collaboration de ORFIM Conseil
Tout public concerné par la mise en oeuvre de l'AMDEC : Production, Qualité, Maintenance, Etudes, ...

ACCOMPAGNEMENT : sur demande, des actions d'accompagnement individualisées peuvent être réalisées pour la mise en oeuvre d'applications concrètes en entreprise.

http://epdweb.engr.wisc.edu/brochures/9382.html

Search this site for courses on FMEA

Date: Sep 18 - 20, 2000
Location: Madison, WI
Fee: $995.00

Date: Sep 21 - 22, 2000
Location: Madison, WI
Fee: $895.00

Date: Oct 23 - 25, 2000
Location: Orlando, FL
Fee: $995.00

Date: Oct 26 - 27, 2000
Location: Orlando, FL
Fee: $895.00

http://iaa.w3bt.com/FMEA.htm

Design/Process/Product FMEA (Failure Mode and Effect Analysis) 5 hours course with follow up

Content :

Identify the need of FMEA's.

Introducing standardized evaluation criteria.

Learning how to complete the form in a structured way.

Learning how to use the FMEA tool on a practical example.

http://pages.prodigy.net/qprocessesinc/train.htm

Training Services

This course is taught either as a 4 hour overview, or 8 hours with practical exercises. Failure Mode & Effects Analysis, for both Design and Process, is introduced as a tool to help identify areas of high risk and the creation of control measures to reduce likelihood of product or process difficulties. This course is taught as needed by our clients who are required to include this method as part of their Quality System.

http://quality-system-solutions.hypermart.net/FMEATraining.htm

This class is designed to introduce class participates to the FMEA procedure, the components of the procedure and practical examples of its use in a manufacturing environment. The entire second half of the class incorporates an interactive class FMEA example.

http://www.4abetterbusiness.com

The FMEA Training & Implementation Guide is a computer-based training tool which helps employees learn to apply systematic process improvement to many areas of a business.
The benefits of systematic analysis using Failure Mode Effects Analysis (FMEA) have long been known, but many companies have found it hard to get started and to effectively train new people.

http://www.adamssixsigma.com

Adams Six Sigma Specialist in total quality management (tqm), strategic planning, goal setting, team building, employee motivation, statistical process control (spc), management training, and management consulting.

http://www.aedc.com.au/FMEA.htm

Failure Mode & Effect Analysis : A Practical Grounding in the Issues, Techniques & Implementation Strategies for FMEA. 2 Day Course

http://www.aiag.org/education/plexus.html#fmeacore

This one-day course develops the participants’ understanding of FMEA through group activities and individual participation. In general, participants identify the benefits of FMEA, as a prevention tool for both design and process, and gain skills to complete and apply a Design FMEA (DFMEA) and a Process FMEA (PFMEA). After course completion, participants have obtained an understanding of FMEA for both design and process, the skills to apply FMEA and QS-9000 and an awareness of FMEA responsibilities. This course utilizes examples and case studies for applications of QS-9000 and the TE Supplement as appropriate.

NOTE: Attendees have the option to have either QS-9000 or TE course materials. Please note at time of registration which material is preferred..

Course Dates and Location:

August 23, 2000, Southfield, MI

September 20, 2000, Southfield, MI

October 25, 2000, Southfield, MI

http://www.asiqs.co.uk/fmea.html

We offer in-house workshops in FMEA which can be customised to meet your precise needs.

This course is only available as an in-house course and the price is dependent on the number of delegates participating. Please contact our office for further information.

email: theoffice@asiqs.co.uk

http://www.asiusa.com/MANUFACT/FMEA/

The American Supplier Institute Failure Mode and Effects Analysis Workshop

This two day workshop provides the skills and knowledge needed to increase value through systematic control of function. It provides an understanding of how things can go wrong, and shows you how to plan and act to prevent or reduce the likelihood of negative consequences.

http://www.besttest.com/Courses/FMEA.htm

You will learn how to prepare and utilize FMEA to improve reliability, safety, testability, and maintainability.

Abstract: This course will describe FMEA methodology and its multiple uses for a more reliable, testable and maintainable product..

Who should Attend: Engineers and managers of all disciplines will find this course extremely useful to their work.

http://www.bpp-tech.com/index.htm?failure

Each potential failure mode in the system is analysed to determine its effect and to classify it according to its severity. The objective is to identify reliability-critical areas in the system for which modifications to the design or maintenance procedures are required to eliminate single point failures and any catastrophic or critical consequences of such failures. Each individual component of the system is considered separately for each of its failure modes.

Specific expertise :

Platforms & Vessels - Outline, Conceptual & Detailed Design

Naval Architecture & Marine Engineering

Dynamic Positioning & Mooring Systems

Support of Offshore Drilling Operations

http://www.bta.qc.ca/formation1.html

Session 2090 FMEA and risk assessment

Clients: Managers and Employees; Formula: 7 hours / Customized

http://www.chez.com/framatech/AMDECWEB.html (French)

Analyse des modes de défaillance, de leur effets et criticité
Fiabilité et sureté de fonctionnement

http://www.competitiveedge.net/consulting/CSfmea.htm

A Competitive Edge Resources facilitator will lead your FMEA session - drawing on many years of experience using this effective technique with organizations across the spectrum.

The session begins with the creation of a FMEA team and a definition of the intent of your specific design or process. From there, the facilitator will help you prioritize the process or design elements involved, determine the risks associated with each, prioritize those risks based on severity and occurrence, develop corrective actions, and assign responsibilities and deadlines. The FMEA technique can be repeated for any process or design - ensuring your improvement effort is an ongoing one.

http://www.corpserv.delta.edu/main/Quality/FMEA.htm

Description of the training:
Identifies the benefits of Failure Mode Effects Analysis as a preventative tool for both design and process. Provides practical experience and skills in completing the FMEA.

Course Outline: Failure Mode and Effects Analysis in the QS-9000 Requirement ; What questions do the Design and Process FMEAs Answer ; Where the Design and Process FMEAs Fit into APQP ; Design FMEA ; Design FMEA Checklist from APQP ; Process FMEA ; Process FMEA Checklist from APQP ; Signs of a Successful FMEA

http://www.cpe.fr/formation/qualite/amdec.htm

Amdec :Analyse Des Modes De Defaillances, De Leurs Effets Et De Leur Criticite

http://www.csp.fr/brochure/PRODUCTION/5_p73.html

AMDEC : mise en oeuvre et plan d'action

* La Qualité Totale et l'AMDEC :

- la prévention et l'analye des risques,

- l'AMDEC et la résolution de problèmes.

* L'AMDEC dans votre processus de développement.

* Les différents types d'AMDEC produit, processus, projet ...

* L'équipe AMDEC et son animateur.

http://www.does.org/masterli/q35.htm

This program is consistent with the FMEA format and approach developed jointly by Ford, GM and Chrysler, in collaboration with the Automotive Division of the American Society for Quality (ASQ) and the Automotive Industry Action Group (AIAG). It will help you get the maximum return from FMEA, whether you need to comply with AIAG guidelines or are simply interested in improving the reliability of your products.

Target Audience

Design, reliability, manufacturing and quality engineers, as well as individuals from sales and marketing, purchasing, customer service and technical support.

Completion Times

Approximately six to eight hours for the full program, depending on the amount of customization, number of supplemental examples, and other variables.

http://www.enib.fr/~jpgerval/VersionUK/CoursesUK.html

On line FMEA course (see also http://www.enib.fr/~jpgerval/)

http://www.fdatraining.com/inhouse.shtml

Noblitt & Rueland offers private in-house training courses on regulatory, quality, technical, and management issues. Entire product teams and companies can be trained at one time assuring the understanding and efficient implementation of new processes, philosophies, requirements, and regulatory compliance issues into an organization. An in-house course allows for smaller more intimate discussions specifically addressing the needs of your organization. In-depth, detailed discussions occur without risking confidentiality*. Participants hear the same message and discuss issues together, allowing them to more efficiently integrate the concepts learned into everyday operations. This is especially helpful for cooperative integration of concepts across departmental boundaries. You control the environment with courses being held at a location of your choosing. Prior discussions with the course director(s) help customize the course to focus on specific areas that may require attention. Pricing for each course is based on the number of days, the number of speakers, and the number of participants involved.

Course Titles include: Risk Assessment and Hazard Analysis-FMEA & FDA/ISO '99

http://www.go-psi.com/fmea.htm

Our FMEA training will prepare the participants to create their own design and/or process FMEA's. Lecture and team interaction combine to instruct and illustrate the techniques. Teams are encouraged to use their own products or processes as examples. This topic can also be taught as a short overview of benefits and how to get started.

Our FMEA efforts are overseen by Heather Clark. She is the North American lead FMEA instructor for Ford Motor Company. Further, she is a frequent FMEA lecturer for both universities and trade organizations. PSI has facilitated thousands of hours of FMEAs for both products and processes.

http://www.iaa.be

Training and consulting service provider for FMEA and other automotive quality tools

http://www.iaehv.nl/users/reinder/cnsult1d.htm (Dutch)

FMEA: methodisch op zoek naar risico's met de Faal Manier en Effect Analyse

In een FMEA worden van ieder onderdeel uit een produkt (of iedere stap uit een produktie-proces) de functies benoemd.
Van iedere functie worden mogelijke faalmanieren geformuleerd.
Vervolgens worden voor iedere faalmanier drie grootheden geschat:
de kans op optreden (O),
de ernst (E)
en de kans op het onopgemerkt blijven van de fout (D van detecteerbaarheid).
Deze drie grootheden worden met elkaar vermenigvuldigd en leveren aldus het 'risico-prioriteits-nummer' op.
Het RPN wordt hoger naarmate het optreden van de fout waarschijnlijker is, meer schade veroorzaakt en moeilijker tijdig te signaleren is.
Hoe hoger het RPN, hoe urgenterer actie ondernomen moet worden om het optreden van de potentiële fout te voorkomen.
De analyse vindt zijn neerslag in standaard FMEA-werkbladen.

http://www.icdt.com/no/course/kurs_andre.html (Norwegian)

FMEA - Risikoanalyse
FMEA (Failure Mode and Effects Analysis) er en preventiv kvalitetsstyringsmetode for oppbygging av en intern erfaringsbank av erfaringsdata. Metoden er en risikoanalyse med fokus på reduksjon av sannsynligheten for potensielle feil i konstruksjon- og prosessammenheng.

http://www.jardine.co.uk

The Jardine Group commands a leading world-wide position in providing innovative, value added solutions to clients asset and risk management problems in the Oil & Gas, Chemical, Power, and Transportation industries.

http://www.jbfa.com/105.html

Do you work with mechanical systems (e.g., crushing, web handling, packing), electrical systems (e.g., controls, power distribution), nonreactive chemical systems (e.g., distillation, blending), or utility systems (e.g., steam, instrument air)? In this course, you will learn how to apply failure modes and effects analysis (FMEA), a powerful, efficient tool for identifying process hazards in these types of systems. FMEA is an acceptable, but underused, method for performing process hazard analyses (PHAs) mandated by OSHA and EPA. This course will show you how to integrate efficient FMEAs into your PHA program.

FMEA is often the first choice of professional analysts when quantitative results are desired. After completing the course, you will not only know the basics of FMEA, you will also be familiar with failure modes, effects, and criticality analysis (FMECA), which is an extension of FMEA for quantitative applications.

In this course, you will learn: What types of data are available ; Where to locate appropriate data ; How to apply/modify data in specific circumstances ; You will also discover how to calculate risks with FMECA results and how to present those results to decision makers in a usable form (e.g., a risk matrix).

Because we keep the ratio of students to instructors low, you will have plenty of time for one-to-one interaction with your instructor. And, using practical methods, you will lead and contribute to several model FMEAs before completing the course.

http://www.jbfa.com/122a.html

Course Systems Reliability Institute: Failure Modes and Effects Analysis (Course 122A)

This 1-day course teaches students to apply the failure modes and effects analysis (FMEA) technique to their own situations. The course agenda includes significant time for students to practice newly learned skills on realistic problems. Additionally, students learn how to extend their FMEA’s to include quantitative assessments of failure mode likelihood’s, consequences, and risks (a process known as failure modes, effects, and criticality analysis [FMECA]). Each student receives a complimentary copy of FMEA, a PC software program developed by SRI specifically for performing FMEA’s/FMECA’s.

http://www.jbfa.com/pha.html

ABS Group Inc. Risk & Reliability Division (formerly JBF Associates, Inc.) engineers have led hundreds of PHAs, covering all types of unit operations and mode operation. Put our experience to work for you!

A PHA is an organized effort to identify weaknesses associated with the design or operation of a process that could lead to undesirable consequences (e.g., personnel injuries or catastrophic equipment damage). PHA uses structured hazard evaluation techniques (see list below) to identify and evaluate the potential for process accidents in a thorough, orderly, and systematic method.

http://www.media.gwu.edu/~ceep/1711.htm (Link seems to be broken)

Potential Failure Mode and Effects Analysis: Enhancing Product Design and Manufacturing Reliability. Course available by contract only. For more information, contact Sue Zimmerman at (714) 669-7730 or via email at lsz_lonetree@email.msn.com

http://www.mep.tno.nl/wie_we_zijn_eng/organisatie/afdelingen/industriele_veiligheid/productbladen/productblad_IV_FMECA_eng.html

TNO has a vast experience in the application of FMECA.

These include: New designs for diesel injection systems, actuators, flow controllers, pressure regulators , New types of fuel tanks, Protection system of a former waste dump, Money dispensing system, Software dependent control systems, Analysis techniques of emissions from power stations, etc.

TNO Environment, Energy and Process Innovation: e-mail: Theo.Logtenberg@mep.tno.nl

http://www.mikrocentrum.nl/cursus/cursus-00-01/curs00-01-121.htm (in Dutch)

Statistische technieken en risico-analyse cursus.

Failure Mode and Effect Analysis (FMEA)

De Failure Mode and Effect Analysis is een analysemethode waarbij een voorspelling wordt gemaakt van het toekomstige gedrag van een product of proces. Met FMEA hebt u een belangrijk instrument in handen als u kwaliteit in het ontwikkelingstraject wilt integreren. Deze methodiek kan een belangrijk hulpmiddel zijn om een kennissysteem (op basis van ervaring en gekoppeld aan product- en procesmodules) op te zetten. Hierdoor worden kostbare verbeteringen en corrigerende acties tijdens de productie en het gebruik vermeden.

Deze workshop wordt vaak bedrijfsintern verzorgd waarbij onder begeleiding van de docent een FMEA van uw product of proces door alle betrokken specialisten uitgevoerd wordt!

Voor een bedrijfsinterne cursus wordt een separate offerte gemaakt

http://www.mvac.org/

The Michigan Virtual Automotive College was formed in 1996 by the State of Michigan, Michigan State University, the University of Michigan, the state's other colleges and universities, and the auto industry. Today, it is the Michigan Virtual Automotive and Manufacturing College, a division of the Michigan Virtual University. It is working to integrate the automotive education and training offerings of Michigan's higher education providers with the support services needed to provide convenient, cost-effective and high-quality manufacturing education and training.

http://www.mvac.org/mvac/fmeapress.html

Ford And Mvac Partner To Deliver "Failure Mode And Effects Analysis" Training Course Via Ford Intranet

Ann Arbor, MI, October 30, 1998 - Ford Motor Company, in partnership with Michigan Virtual Automotive College (MVAC), has made its Failure Mode and Effects Analysis (FMEA) training course available worldwide on the Internet and Ford Intranet. Students will be able to complete this course at their own pace, and reference course material at any time from their desks.

Ford and MVAC have had great success with their Web-based courses. The FMEA Web-based training course received an Honorable Mention in the Arbor Awards for Excellence. The award is given for the program's innovation and quality as a human resources initiative. Another Ford/MCVAC Web-based course, Global 8D, recently won the Gold Medal Award for training in "Internet Delivery in Sales - Finance – Business Procedures" from Brandon Hall, a nationally recognized distance learning training expert.

The purpose of the most recent Ford/MVAC course is to provide necessary skills and knowledge to create or edit a design, process, or concept FMEA. Students learn to: Analyze risks by identifying potential problems before design release or process implementation. ; Reduce the risk of product or process failure through identification and completion of appropriate actions

http://www.noweco.com/qtode.htm

NOWECO Northwest Controlling Corporation Ltd. : Training On Demand Via CD ROM

Comprehensive SPC and FMEA training that will prepare learners to apply SPC and FMEA immediately in their jobs. You customise the training paths to meet your company´s needs.

http://www.pjramsey.com/html/courses.htm

Recognized as an important tool in the development and production of quality products, FMEA is strongly recommended by both QS-9000 and ISO-9000. We offer a two-day training seminar in FMEA that enables participants to not only learn the tools but also to effectively apply FMEA to their company's products and processes.

We offer a unique and powerful course in FMEA, which will enable the participants to effectively apply FMEA in their company's. We believe that our prices are highly competitive and our training superior. Give us a call or contact us by e-mail today and explore the possibility of one of our customized FMEA programs for your company.

http://www.plg.com/pages/hazanal.html

HAZARD ANALYSES

(HAZOP, PHA, FMEA, WHAT-IF, CHECKLISTS etc.)

PLG has been supporting Hazard Analyses in the Chemical Process Industry since 1989. PLG has provided services, software and training to over 30 major U.S. and International Manufacturing and Engineering Companies.

http://www.pqsystems.com/fmeaoverview.htm

Interactive FMEA Training on CD-ROM

The FMEA Investigator is an interactive, step-by-step multimedia training course that provides effective instructions on how to conduct both design and process FMEAs. It teaches you how to customize rating scales for your specific design or process so that the FMEA gives you meaningful information and results. In addition, you will learn how to link FMEAs to control plans

http://www.qualityi2.com/qi2_fmea.htm

FMEA Training and Consulting by Qi2

This customized workshop provides practical experience and skills for completing an FMEA. You will develop a sound understanding of FMEA through a combination of lecture, group activities, and individual participation. FMEA is a powerful tool for improving the reliability of, including failure prevention for, product design and process applications. Workshop teams are encouraged to work through their own products or processes applications. FMEA is strongly recommended by both QS-9000 and ISO-9000. The FMEA on-site workshop can be presented in either one-, one and a half, or two-day formats depending on how much time the client(s) would like to spend working through their actual applications. FMEA Overviews are also available. Contact Michael G. White, P.E., by e-mail at qi2@qualityi2.com, or visit us at http://www.qualityi2.com/qi2_fmea.htm.

http://www.qualman.com/fmea.html

This 1 day workshop covers all the aspects of performing a product design and process FMEA and this basics of Reliability Engineering including determination of MTBF, failure rate, the basic exponential model, reliability prediction and component modeling. Training in the use and application of FMEA is a requirement of QS-9000 and properly administered can reveal potential problems with the reliability of systems and product. FMEA's can assist greatly in the allocation of resources for quality improvement. This seminar will lead the participants through the "How" and "Why" of performing a FMEA.

http://www.reliability.com?fmea

Reliability Center, Inc. is a company specializing in helping business, industry and government organizations improve reliability in all aspects of their operations. The firm provides consulting, service and training programs to clients using their exclusive Root Cause Analysis PROACT® System.

http://www.reseng.com  

The FMEA Investigator multimedia training CD-ROM gives everyone on your FMEA team a quick and easy "headstart" to understanding how the FMEA process works. Each team member will get a complete and thorough understanding of both process and design FMEAs. This preparation helps members bring better ideas to the FMEA team and leads to successful FMEA implementation.

http://www.scotweb.com/jcm

JCM Technical Management Ltd is run by professional engineers with practical "hands on" engineering skills, academic experience and common sense, offering you a straight forward, reliable service

Project Risk Assessment / Simulations, Planning / Project Support Operations Research Safety Engineering Studies Hazard Analysis Criticality Analysis Verification Schemes Safety Cases – compilation and / or review and updating Design Optimisation Document Management Expert Witness.

For a complete company profile , or details of how we can assist you , please contact John Madden: CEng (Director ) or Valerie Madden Sales / Marketing ) at (UK) 013398 89103, E Mail: tulip@ifb.co.uk

http://www.sgsgroup.com/SGSics.nsf/pages/T_UK_FMEA.html

Training Course: Failure Mode and Effects Analysis
Duration: 2 days
Objectives : At the end of this course, delegates will be able to identify ways in which a process or product may not meet its intended function, examine the potential consequences of that failure and list and numerically rank the causes and effects of the failures. Prioritise actions that can decrease the likelihood of failure occurrence and the associated risk.

http://www.siweb.com/SupplierFMEA/supplierintro/eligibility.asp

Course on FMEA : The content of this course belongs to Ford Motor Company and the course was developed in conjunction with the Michigan Virtual Automotive College. The course is open to Ford employees and approved suppliers. Ford has provided a list of approved suppliers. If your company is not on the approved supplier list, you will have to get special permission to access this course.

http://www.siweb.com/SupplierFMEA/supplierintro/overview.asp

This course is a Web-based version of the Failure Mode Effects Analysis (FMEA) problem solving course offered at Ford Motor Company. The goal of this on-line FMEA course is to provide the basic information necessary to generate Design, Process, and Concept FMEAs. After successfully completing this FTEP course, you will understand the FMEA process and be able to participate as a member of an FMEA team.

Attention Ford Employees!
Ford employees must access this course via the Ford intranet. Contact Fairlane Training and Development Center (FTDC) for more information.

The course was developed by Ford Motor Company in conjunction with the Michigan Virtual Automotive College (MVAC) and Strategic Interactive.

http://www.suedwestfalen.de/agsw/Veranst/FMEA.htm (in German)

FMEA. Produkt- und Prozessplanung vor Serienbeginn

Die FMEA ist eine wirkungsvolle Methode, um systematisch Schwachstellen in Prozessen
zu entdecken und Maßnahmenpläne zu ihrer Beseitigung zu erstellen. Deshalb wird sie
auch bei der Zertifizierung nach VDA 6.1/ QS 9000 und von vielen Kunden verlangt.

In unserem Workshop zeigen wir, wie die FMEA mit vertretbarem Aufwand und mit
maximalem Nutzen angewandt werden kann. U.a. wird auch der Aufbau einer indivi-
duellen Wissensdatenbank vorgestellt.

Nach dem Wokshop sind Sie in der Lage, selbständig eine systematische FMEA sowohl
konventionell (mit Papier und Bleistift) als auch jedem EDV-Werkzeug durchzuführen.

Dauer: 2 Tage

Kontakt: agsw@suedwestfalen.de

http://www.platogmbh.de/ (in German)

Termine für offene Softwareschulungen FMEA und FBA

Software-Schulung FMEA/FBA in Dortmund 26.-28. September 2000

http://www.tda.net/content/fmea.html

Thomas Davenport and Associates have many years of experience in assisting companies to implement effective FMEAs. This area of our web site is intended to help you learn more about FMEAs, and how they can be used to help your company. Site contains also an intro to FMEA (http://www.tda.net/go/fmea/intro1.shtml)

http://www.technicomp.com/planfmea.htm

Courseware, Training program, video’s etc.

This program is consistent with the FMEA format and approach developed jointly by Ford, GM and Chrysler, in collaboration with the Automotive Division of the American Society for Quality (ASQ) and the Automotive Industry Action Group (AIAG). It will help you get the maximum return from FMEA, whether you need to comply with AIAG guidelines or are simply interested in improving the reliability of your products

http://www.teq.de/chemnitz/qualitaett2.htm (in German)

Dieses Seminar vermittelt Kenntnisse, welche die Teilnehmer befähigen sollen, eigenständig FMEA-Sitzungen vorzubereiten, durchzuführen, auszuwerten und umzusetzen.

Aufgrund der besonderen Bedeutung der Qualitätstechnik FMEA im Rahmen der Forderungen des Qualitätsmanagements in Entwicklung, Konstruktion und Fertigungsplanung nach DIN EN ISO 9000 ff., QS-9000 und VDA 4.1 werden die Grundlagen der Qualitätstechnik FMEA aus Sicht des Qualitätsmanagements und der Produkthaftung sowie die erreichbaren wirtschaftlichen Effekte von internen System-FMEA'en im Unternehmen behandelt.

http://www.wclass.com/fmea1.htm

WCS provides a range of support services -  including consultancy and training -  to companies in the manufacturing and process sectors. It also provides several new and innovative services to help companies  overcome the traditional barrier to change.

http://www.wernersgruener.de/MIT_Home/Produkte/FMEA/fmea.html (in German)

Unsere Dienstleistungen im Bereich der Fehlermöglichkeits und Einflussanalyse (FMEA) sind:

- Moderation und Dokumentation von FME-Analysen bestehender Systeme

- Moderation und Dokumentation von entwicklungsbegleitenden FME- Analysen neuer Systeme

Ihre Vorteile:

- Mit der systematischen durchführung von FME- Analysen können Schwachstellen und sicherheitskritische Zustände früh erkannt und beseitigt werden. Vor allem bei der integration neuer Steuerungen und Regelungen wird die Gefahr, dass man etwa "vergisst" deutlich reduziert. Mech@tronic IT

http://www.wpi.edu/Admin/CE/Quality/fmea.html

Attend this information-packed two-day workshop and learn how to assess the probability of error occurrence in your manufacturing processes and the proven techniques to eliminate errors. Through hands-on workshops, you will work in teams on both a design and process FMEA, present your findings and critique your results. At the end of this seminar, you will have a new set of skills that you can put to use immediately to improve the quality and profitability of your operations.

Attendees receive Guidelines for Performing A Design and Process FMEA, a handy reference tool for use during the workshops and an excellent resource for developing a company-specific document for your organization!

Prerequisite: To benefit from this seminar, attendees must have completed a basic statistical process control seminar or have substantial background in probability.

The FMEA Investigator is an interactive, step-by-step multimedia training course that provides effective instructions on how to conduct both design and process FMEAs. It teaches you how to customize rating scales for your specific design or process so that the FMEA gives you meaningful information and results. In addition, you will learn how to link FMEAs to control plans.

Last update December 14, 2000